HMI's joysteer 3.0

    The input devices (HMI’s) can be used within the joysteer 3.0 System, but also as “stand-alone” Module. All HMI’s are designed with redundance on ASIL D Level. The HMI’s with the extension “active FF” does have an integrated active Force Feedback. This allows a safe and comfortable driving, especially at higher speeds. The HMI’s can be operated by people with physical disabilities, but can also be used as an alternative Input device instead of the classical steering wheel.

    HMI’s «steer only»

    One Hand joystick active FF
    Integrated Force Feedback motor
    Max Torque 1.0 Nm
    2 way joystick «steer only»
    Asymmetric design (for hand rest)
    Can be ordered in configurations for left and right hand
    Micro-wheel
    Passive feedback with spring damper
    Lock to Lock :
    3.0 revolution / side
    2.0 revolution / side
    1.0 revolution / side
    Small in size, especially on height
    Micro-wheel active FF
    Integrated Force Feedback motor
    Max Torque 1.4 Nm
    Lock to Lock defined by parameter
    Force Feedback Module
    Integrated Force Feedback motor
    Max Torque 1.0 Nm

    HMI’s «steer, brake, gas»

    4 Way joystick active FF
    Integrated Force Feedback motor
    Max Torque 1.0 Nm
    4 way Joystick
    Asymmetric design (for hand rest)
    Can be ordered as configurations for left or right hand

    HMI’s «gas / brake»

    2 way joystick «brake / gas»
    Asymmetric design (for hand rest)
    Can be ordered in configurations for left and right hand
    Slider
    Passive feedback with spring
    Stroke variable:
    40 mm / side
    50 mm / side
    60 mm / side
    Force variable:
    Depending on stroke and spring
    Tilter
    Flat construction
    Asymmetric design (for hand rest)
    Can be ordered in configurations for left and right hand

    HMI «brake only»

    Brake Lever
    Brake Lever operated on the fly, e.g. as a temporarily installation on customer cars. Easy to mount and dismount.
    Additional HMI for instructors to instantly override with a brake command.
    Acceleration will be disabled when brake is applied.